DIY: Construct A Simple Arrow Holder in Less Than 5 Minutes

This one is so simple, it almost doesn’t warrant a tutorial, but since I had someone ask how I made it, I figured I would include a quick post.

Materials Needed

• 4” Pipe
• ABS 3″ or 4″ ABS Closet Flange

Step 1: Cut a Length of 4″ Pipe

Measure and cut an 18″ length of 4” pipe to serve as a holder for the arrows. I had some leftover pipe from a french drain I dug so that is what I went with.

Step 2: Attach the Flange

Hammer the floor flange onto one end of the pipe to form the base.

Step 3: Flare the End of the Pipe

Evenly heat the other end of the pipe with your heat gun. Using a flared bottle (I used a glass measuring cup), flare the end of the pipe outward.

Still In A DIY Mood

If that was too quick for you, take the next challenge up and build yourself an archery stand.

DIY Archery Stand
Building a 3D and Bag Archery Stand Learn How